Issue link: http://digital.copcomm.com/i/1178376
measurement technology create an array of data tied specifically to the chosen audio playback region relative to the physical surroundings, highlighting any deviations in the audio spectra due to any dampening or sound augmenting elements arriving to the human ear. The calibration is carried out by Sonarworks Audio Calibration Filter Engine (ACFE) that also includes Speaker Range Extension (SRE) technology to extend or limit the high-and low-end response of the target speaker system." First, you have to calibrate the mic and speaker levels to your system (of which there is a well-defined procedure). In addition to the sweetspot, you place the mic very close (under two inches) to the main driver of your speaker (see photo). After you do this for each speaker, the software tells you how far apart your speakers are! You Dots show all the positions that were measured (37 total) View when sitting near the listening position. Software indicates where you need to position yourself for the next test measurement Positioning the mic for measurement